User Manual

45
Setup - Event Setup
Motion Detection Configuration
1
Motion Detection - It shows the Motion event status.
Event Alert Icon( ) appears if ‘Motion Detection’ is activated.
2
Area - Set the motion detected area. Click in the display window to draw the motion area.
You can set up to four areas.
3
Activation - Enable or Disable motion detection function.
4
Sensitivity - Define the sensitivity of motion detection.
If High value is selected, it will detect very small motion while it becomes relatively insensitive when Low value
is selected.
5
Click ‘Save’ to save all settings.
Click 'Cancel' to return to the previous setting.
1
3
2
4
5