User Manual

SMTP Settings
Setup -
1
2
4
6
8
10
3
5
7
9
11
Mode
Select Security mode of SMTP from Plain or SSL / TLS. After
checking account setup of your SMTP Server, you may
select one.
SMTP Server Address
Dene the SMTP Server Address. If the IP Address form is
incorrect, a Message box will be shown to try again.
2
General Setting
SMTP function can be enable or disable.
1
3
Port
Dene the Port used in the Plain or SSL / TLS security mode
in the above.
4
To send / save the image to the relevant sites by Email, SMTP
needs to be setup.
User ID
Dene the User ID to access to SMTP Server. Fill out the
correct User ID registered in the SMTP Server.
5
Password
Dene the Password to access to SMTP Server. Fill out the
correct Password registered in the SMTP Server.
6
11
Click ‘Apply’ to make above setting eective.
E-Mail Sender
Dene the e-mail address of E-Mail Sender. It will be
displayed as the sender when the camera sends an E-mail.
7
E-Mail Receiver
Dene the e-mail address of E-Mail Receiver. It will be
displayed as the Receiver when the camera sends an E-mail.
8
Message
Dene the contents of E-Mail when camera sends an E-mail.
The message of the Email is limited to 40 characters including
the spaces.
10
Title
Dene the title of the E-Mail when the camera sends an
E-mail.
9
The title of the Email is limited to 40 characters including
the spaces.
44