Manual

1. Detach the camera’s cover dome from the

camera’s module by unscrewing the three cover

dome screws using the L-Wrench.

2. Use the camera or mounting template to mark

and drill the necessary holes in the wall or

ceiling.

3. Pull wires through and make connections.

4. Using three (3) included screws, mount and

secure the camera to the wall or ceiling.

5. Secure the camera’s cover dome onto the

camera base to complete the installation.

INSTALLATION*

To adjust the camera’s orientation:

1. 1. Loosen the tilt stopper screw at the base of the

camera’s Gimbal by rotating it counter clock-wise.

2. 2. Move the camera to the desired angle.

3. 3. Secure the camera’s lens position by screwing

the tilt stopper screw clock-wise.

A d j us t i n g t h e C a m e r a ’ s A n g l e

E a s y C a m er a I n s t a l la t io n