User Manual

D i s p l a y S c r e e n > S e t u p > N e t w o r k > N e t w o r k S e t t i n g s

1. IP Mode: Select the type of IP address for the camera.

DHCP: IP is assigned automatically.

PPPoE: Select this option when you use WAN service. To use WAN service, you will need a Username and

Password from your Internet Service Provider.

Static IP: Enter IP information on existing field if you decided to give the camera a static (fixed) IP address.

2. DNS: Enter Primary DNS and Secondary DNS.

3. IPv6 Mode: IPv6 offers a new 128-bit address system. You can use it to use an Automatic address generated by

the network, or you can manually enter a Static address.

4. MAC Address: Displays the camera’s MAC (Mobile Access Control) Address.

5. PORT: Displays all the ports necessary for network communication.

6. Reboot your system to apply the changes to your camera. To Reboot, select Apply. A dialogue box will appear,

select OK. System will automatically restart and may take up to 20 seconds to reboot.

WEBVIEWER*