User Manual

D i s p l a y S c r e e n > S e t u p > E v e n t > E m e r g e n c y A l a r m

Send alarm triggered information to predefined destination (i.e. remote client software).

1. Site Information: Site Name, Transmission Settings, and Video Duration for the video that will be sent when

motion is detected.

2. Emergency Alarm Recipient List: Enter the IP address and the Port for the remote site(s) to which you want to

send the video. You can set up to five different servers. You must set same port to get EA data.

3. Event for EA: Select which type of even will trigger the alarm – Motion or Sensor.

4. Select Apply to save changes.

WEBVIEWER*