User Manual

D i s p l a y S c r e e n > S e t u p > E v e n t > M o t i o n D e t e c t i on

The Motion detection feature allows the MEGAPIX camera to detect motion and trigger an alarm. To set the camera to

send e-mail notifications for every motion triggered alarms, see PAGE 50.

1. Check the Use Motion box.

2. Sensitivity: Select from Low, Middle, or High.

3. Dwell Time: When a motion is triggered, the camera can be set to record for a certain period of time. Dwell Time

can be set up to 900 seconds.

4. Relay: Select None or 1.

5. Duration: select how long after motion is detected the camera will record video. Select from 0~900 seconds.

6. Select Apply to save changes.

To setup specific areas of the camera’s view to motion detection, please see the next page.

WEBVIEWER*