User Manual

1
2
3
CAM ID 1
BAUDRATE 9600
SET DONE OFF
RETURN
COMMUNICA
COMMUNICA
CAM TITLE OFF
IMAGE RANGE FULL
FREQ 60Hz
LANGUAGE ENG
INITIAL OFF
EXIT JUMP
SETUP
EXPO MOTI PRIVRGB D&N FUNC SET EXIT
1
COMMUNICATION
Adjust the camera’s ID and Baudrate. Default Protocol is Pelco-D.
- CAM ID : Provide an ID number for the camera (0 ~ 255).
- BAUDRATE : 9600bps is default. Select the baudrate from the following options :
2400/4800/9600/57600/115200 bps.
- SET DONE : Set the value of CAM ID and BAUDRATE.
2
CAM. TITLE
Add a name to the camera. Set the title by using the OSD joystick.
IMAGE RANGE
Image Range allows you to set the proper Black and White levels according to the external display you use.
- FULL : Display all BLACK level and WHITE level without compression.
- COMP : Display BLACK level and WHITE level with compression.
- USER : Reset the BLACK level by changing the OFFSET value.
3
OSD Menu
_
Setup
NOTE
:
Be sure to press “Save&Exit” button on the EXIT menu before saving.
24