User Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- DIMENSIONS*
- INSIDE THE BOX *
- NETWORK CONNECTION*
- INSTALLATION*
- INSTALLATION*
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- Slide Number 44
- Slide Number 45
- Slide Number 46
- Slide Number 47
- Slide Number 48
- Slide Number 49
- Slide Number 50
- Slide Number 51
- Slide Number 52
WEBVIEWER*
SETUP > ADVANCED CONFIGURATION > BASIC EVENT>
MOTION DETECTION
Motion detection detects the moving objects in the configured surveillance
area, and a series of actions can be taken when the alarm is triggered.
Expert mode: use the expert mode to configure the sensitivity and proportion of object on area of each
area for different day/night switch.
• Day/Night Scheduled-Switch
1. Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2. Select Scheduled-Switch for
Switch Day and Night Settings.
3. Select the start and end time for
the switch timing.
4. Select the area by clicking the area
number.
5. Slide the cursor to adjust the
sensitivity and proportion of object on
the area for the selected area in
daytime.
6. Slide the cursor to adjust the
sensitivity and proportion of object on
the area for the selected area at night.
7. Click Save to save the settings.
42