User Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- DIMENSIONS*
- INSIDE THE BOX *
- NETWORK CONNECTION*
- INSTALLATION*
- INSTALLATION*
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- Slide Number 44
- Slide Number 45
- Slide Number 46
- Slide Number 47
- Slide Number 48
- Slide Number 49
- Slide Number 50
- Slide Number 51
- Slide Number 52
WEBVIEWER*
SETUP > ADVANCED CONFIGURATION > BASIC EVENT>
MOTION DETECTION
Motion detection detects the moving objects in the configured surveillance
area, and a series of actions can be taken when the alarm is triggered.
• To s e t the motion detection Area:
• Check the checkbox of Enable Motion Detection.
• Select to enter Normal or Expert Configuration mode from the drop-down menu.
a. Normal: use the camera’s grid system to select which areas to enable motion detection for.
1. To set the motion detection zone,
click on the Draw Area. Click and
drag the mouse on the video
preview screen to draw the motion
detection area.
2. You can adjust the sensitivity
levels using the Sensitivity bar. The
higher the number, the camera will
be more sensitive to motion.
b. Expert: use the expert mode to
configure the sensitivity and
proportion of object on area of each
area for different day/night switch.
See next page for setup information.
39