User Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- DIMENSIONS*
- INSIDE THE BOX *
- NETWORK CONNECTION*
- INSTALLATION*
- INSTALLATION*
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- Slide Number 44
- Slide Number 45
- Slide Number 46
- Slide Number 47
- Slide Number 48
- Slide Number 49
- Slide Number 50
- Slide Number 51
- Slide Number 52
WEBVIEWER*
SETUP > BASIC CONFIGURATION > IMAGE > DISPLAY
SETTINGS
Use this menu option to adjust the camera’s view.
The camera’s image can be adjusted according to the lighting environment in which it is installed. If
necessary, use this menu to adjust the camera’s Day/Night settings, exposure, DNR, etc.
• Noise Reduction
a. Digital Noise Reduction: Control the level of noise in the image. If enabled, adjust the level of noise
reduction.
b. Noise Reduction Level: Set the DNR level from 0~100, and the default value is 50.
• Video Adjustment:
a. Mirror: It mirrors the image so you can see it inversed. Left/Right, Up/Down, Center, and OFF are
selectable
b. Rotate: To make a complete use of
the 16:9 aspect ratio, you can enable
the rotate function when you use the
camera in a narrow view scene.
When installing, turn the camera 90
degrees or rotate the 3-axis lens to
90 degrees, and set the rotate mode
on. You will get a normal view of the
scene with 9:16 aspect ratio.
c. Video Standard: 50 Hz and 60 Hz
are selectable. Choose according to
the different video standards.
32