User Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- DIMENSIONS*
- INSIDE THE BOX *
- NETWORK CONNECTION*
- INSTALLATION*
- INSTALLATION*
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- Slide Number 44
- Slide Number 45
- Slide Number 46
- Slide Number 47
- Slide Number 48
- Slide Number 49
- Slide Number 50
- Slide Number 51
- Slide Number 52
WEBVIEWER*
SETUP > BASIC CONFIGURATION > IMAGE > DISPLAY
SETTINGS
Use this menu option to adjust the camera’s view.
The camera’s image can be adjusted according to the lighting environment in which it is installed. If
necessary, use this menu to adjust the camera’s Day/Night settings, exposure, DNR, etc..
• Backlight Settings
a. BLC Area: If you focus on an object against strong backlight, the object will be too dark to be seen
clearly. BLC compensates light to the object in the foreground to make it clear. If enabled, select the
area in the camera’s view to apply the BLC mask. Select from: Up, Down, Left, Right and Center.
b. WDR: Wide Dynamic Range can be used when there is a high contrast of the bright area and the
dark area of the scene.
• White Balance: This gives the camera a reference to “true white.” White Balance is used to make
colors appear the same in the Field of View (FoV) no matter what is the light temperature of the light
source. Select form the available
drop-down menu options.
31