User Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- DIMENSIONS*
- INSIDE THE BOX *
- NETWORK CONNECTION*
- INSTALLATION*
- INSTALLATION*
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- Slide Number 44
- Slide Number 45
- Slide Number 46
- Slide Number 47
- Slide Number 48
- Slide Number 49
- Slide Number 50
- Slide Number 51
- Slide Number 52
WEBVIEWER*
SETUP > BASIC CONFIGURATION > IMAGE > DISPLAY
SETTINGS
Use this menu option to adjust the camera’s view.
The camera’s image can be adjusted according to the lighting environment in which it is installed. If
necessary, use this menu to adjust the camera’s Day/Night settings, exposure, DNR, etc..
• Exposure Settings
a. Iris Mode: This camera is equipped with a fixed 4.0mm lens. Therefore the Iris mode is set to
manual by default.
b. Exposure Time: Select the shutter speed from 1/3~1/100000. The default is 1/30.
c. Gain
• Day/Night Settings: Select the day/night switch mode, and configure the smart IR settings from this
option.
a. Day/Night Settings:
Day: the camera stays in day mode.
Night: the camera stays in night
mode.
Auto: the camera switches between
the day night mode according to
the level of light in the camera’s
scene. If Auto is selected, adjust the
sensitivity and filter time.
The sensitivity ranges from 0~7.
The higher the value is, the easier
the camera will switch modes.
The filtering time refers to the time
between the day/night switch. Set it
from 5s to 120s.
Schedule: Set the start time and
end time for the day/night duration.
b. Smart IR: Smart IR: adjust the power
of the IR LED, providing a clear image
that is not overexposed or too dark.
30