User Manual
Table Of Contents
- Slide Number 1
- Slide Number 2
- Slide Number 3
- Slide Number 4
- Slide Number 5
- DIMENSIONS*
- INSIDE THE BOX *
- NETWORK CONNECTION*
- INSTALLATION*
- INSTALLATION*
- Slide Number 11
- Slide Number 12
- Slide Number 13
- Slide Number 14
- Slide Number 15
- Slide Number 16
- Slide Number 17
- Slide Number 18
- Slide Number 19
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- WEBVIEWER*
- Slide Number 44
- Slide Number 45
- Slide Number 46
- Slide Number 47
- Slide Number 48
- Slide Number 49
- Slide Number 50
- Slide Number 51
- Slide Number 52
WEBVIEWER*
SETUP > BASIC CONFIGURATION > IMAGE > DISPLAY
SETTINGS
Use this menu option to adjust the camera’s view.
The camera’s image can be adjusted according to the lighting environment in which it is installed. If
necessary, use this menu to adjust the camera’s Day/Night settings, exposure, DNR, etc..
• Switch Day and Night: Day/Night scheduled-switch configuration allows you to set separate camera
parameters for day and night switch, guaranteeing image quality in different illumination.
1. Set the start and end time for the switch schedule.
2. Click Common tab to configure the common parameters applicable to the day and night modes.
3. Click the Day tab to configure the parameters applicable for day mode.
4. Click the Night tab to configure the parameters applicable for night mode.
Image Settings:
a. Brightness ranges from 1~100. Default value is 50.
b. Contrast ranges from 1~100.
Default value is 50.
c. Saturation describes the
colorfulness of the image color.
Range from 1~100. Default value is 50.
d. Hue describes the warmth of the
colors of the image. Ranges from 1~100.
The higher the number, the camera’s
image will use warmer tones. The lower
the number, the camera’s image will use
cooler color tones. Default value is 50.
d. Sharpness describes the edge
contrast of the image. Ranges from 1~100,
and the default value is 50.
29