Quick Start Guide
LED
EX-LED
EX-LED
DC12V
Power
INSTALLING THE MOUNTING ACCESSORY
Rev Date: 07/17
Copyright © Digital Watchdog. All rights reserved.
Specications and pricing are subject to change without notice.
INSTALLATION ON AN IP CAMERA INSTALLATION ON AN ANALOG CAMERA
Quick Start Guide
1. Connect the EXT-LED cable from the illuminator to the camera’s cable labeled “EX-LED”
2. Connect the power cable to an adequate power supply.
• Power requirements: DC12V/AC24V Dual Voltage
• Power consumption: DC12V : Max 11.0W, AC24V : Max 11.0W
PARTS & DIMENSIONS
5.06”
(128.6mm)
6.28”
(159.6mm)
1.09”
(27.9mm)
1.45”
(37mm)
NOTE: Please check your
hardware to see if it supports the IR
illuminator connection.
NOTE: The illuminator’s cables can
be placed in any of the four holes in
the camera’s mounting bracket.
IR LEDs
Screw
DC12V / AC24V Cable
EX-LED Cable
12VDC / 24V AC 12VDC / 24V AC
LED
EX-LED
DC12V
Power