User manual

23
SET-UP
MONITOR
MODE 1 / MODE 2
LANGUAGE
Total of 10 different languages are supported - ENGLISH, MANDARIN (CHINESE 1), CANTONESE (CHINESE 2),
DEUTSCH, FRENCH,
OSD COLOR
Total of 8 different OSD Menu Colors available - BLUE, GREEN, CYAN, RED, MAGENTA, YELLOW, PURPLE, GRAY.
COMMUNICATION
OFF / ON
FACTORY SET
If selected, the camera reverts back to factory default settings.
Note: FACTORY SET does not affect the LENS, DAY & NIGHT, CAMERA ID, and DPC settings.
If ON is selected, you can define the following:
*PROTOCOL: PELCO-D only.
*CAMERA ID: Provide the ID no. on the camera (0~255).
*BAUDRATE: 9600bps is the default.
There are a total of 4 choices - 2400bps, 4800bps, 9600bps, and
19200bps.
MODE 1 is the default. If the displayed image is not adequate, try MODE 2.
EXIT_JUMP
SAVE & EXIT
EXIT
Exit the OSD after saving the current settings.
Exit the OSD without saving.
ITALIAN, RUSSIAN, SPANISH, a nd DUTCH.
JAPANESE,