User Manual

User Manual | 58
E-MAIL NOTIFY
The system can send a notification to an e-mail address. Select E-MAIL NOTIFY to use this function and set e-mail address & events.
ADD / EDIT / DELETE
- E-MAIL: Input e-mail address which will receive events notification.
- EVENT: Select events to be notified. When “ALL” is selected, all of the events will be notified.
SENDER Setting (SMTP)
Need to set sender to send e-mail notification.
 SMTP: Input SMTP server address.
 PORT: Input the port number that will be used for e-mail sending.
 USER: Input the user of the sending account.
 PASSWORD: Input password of the sending account.
 FROM: Input sender’s e-mail address.
 E-MAIL TEST: Check if the settings were entered correctly. The NVR will send an e-mail and inform you of the result.
2) In some cases, SMTP server does not send e-mail if the e-mail is received.
 Use SSL AUTHENTICATION: Incase the SMTP server requires SSL authentication
(e.g. Gmail, Yahoomail, etc.), select this option.
Note
Configuration first priority is always on “RECORD > SCHEDULE” menu.
Thus, the system will not email alarm message upon motion alarm or sensor even though the check-box of above event selection is checked. To
receive motion and sensor e-mail notifications, set the “SCHEDULE > RECORD”, “EVENT > MOTION ALARM” and “EVENT > SENSOR” accordingly.