User Manual

55 | VMAX IP Plus™ NVR
BANDWIDTH LIMIT
Depending on the setting made by user, the system can control the data volume transmitted over network ranging from
25 kbps up to 1Gbps. This function is effective especially under narrow bandwidth network condition or when user
wants to limit “network bandwidth occupied by video transmission” to a certain level. Default is 100 Mbps
USE UPnP (Universal Plug and Play)
UPnP is a plug-and-play feature that allows the NVR to be automatically discovered by a PC on the same network. To
locate the NVR, go to “My Network” on your PC. The computer will scan your network for all supported devices. The
first five characters of the file name of a detected NVR represent the model number, followed by the NVR’s IP address
Once the PC discovered the NVR, double click on the icon to open the NVR’s web client. Enter your User ID and Password to login and click ‘Connect’ to connect.
Note
The maximum number of simultaneous connection is 15 users.
POE SETTING
 SETUP
Manually setup the IP address and subnet mask for the PoE cameras connected directly to the NVR.
 STATUS
Check the status of PoE cameras connected to the NVR and reset all PoE camera as needed.
 NETWORK MONITOR
Check network status of each camera and data flow information for the NVR and cameras.