User Manual

51 | VMAX IP Plus™ NVR
4.4.2. RECORDING SCHEDULE
Set recording schedule for each camera. Select the camera to set schedule, or “All”. Recording can be set by each hour from 00 through 23 a day, for all days of the week.
You can also setup a special recording mode for holidays.
NO COLOR (Off)
No recording. Even though user set recording frames in the “CAMERA” setup menu, the system will not record anything if user sets “OFF” in the schedule table.
YELLOW (Continuous Recording)
Record all the time as set in the “CAMERA” settings.
GREEN (Motion-Detection Recording)
The system records only when motion is detected.
If “EVNET > MOTION ALARM” is disabled, then the system will record when motion is detected but motion alarm will not be activated.
ORANGE (Sensor-Activated Recording)
The system records only when a sensor is triggered as set in “EVNET > SENSOR” menu.
If “EVNET > SENSOR” is disabled, then the system will record when a sensor is triggered but sensor alarm will not be activated.
SKY BLUE (Continuous + Motion Detection Recording)
The system records continuously as set by “RECORD > CAMERA” menu.
When motion is detected according to the settings in “EVENT > MOTION ALARM”, the NVR will switch recording mode to motion configuration. If “EVNET >
MOTION ALARM” is disabled, then the system will record when motion is detected but motion alarm will not be activated.
BROWN (Continuous + Sensor-Activated Recording)
The system records continuously as set by “RECORD > CAMERA” menu.
When a sensor is triggered according to the settings in “EVNET > SENSOR”, the NVR will switch recording mode to motion configuration. If “EVNET > SENSOR”
is disabled, then the system will record when a sensor is triggered but sensor alarm will not be activated.
PINK (Motion Detection + Sensor-Activated Recording)
The system records only when motion is detected AND when a sensor is triggered at the same time. If both “EVNET > SENSOR” and “EVENT > MOTION ALARM”
are disabled, then the system will record when a sensor is triggered and motion is detected but neither sensor nor motion detection alarms will be activated