User Manual

49 | VMAX IP Plus™ NVR
4.3.3. EXTRA ALARM
Setup alarms for additional NVR abnormalities such as SMART HDD check, VIDEO LOSS, RECORDING FAILURE and DISK FULL.
S.M.A.R.T.
Trigger an alarm signal when HDD is about to be out of operation. Please refer to “4.1.4 HDD” to check the HDD status.
VIDEO LOSS
Trigger an alarm signal when a camera signal is disconnected.
RECORDING FAILURE
Trigger an alarm signal when the system does not record images due to an error in HDD or system.
DISK FULL
Trigger an alarm signal when the HDD is occupied with a certain percentage of its capacity. If user set HDD FULL as STOP RECORDING and the HDD is occupied
with the certain percentage set here, NVR stops recording and alarm trigger.
Note
Extra alarm will appear in the event log only when it is set as “ON”.