User Manual

45 | VMAX IP Plus™ NVR
 END CHARACTER: Input the assigned character to terminate display and save. It must have START CHARACTER to work correctly.
 LINE BREAK: Set the line change character. (It should be 16 digits HEX Value.)
 [CRLF] / [CR] / [LF]: The character that is generally used in ASCII-type Transaction Verification. (Please contact
Transaction Verification manufacturer for the detail.)
 [Custom]: It can be used except the above general character. Only number (0~9) and alphabet (A ~ F) can be used and
even numbers should be input.
ex) Hexadecimal: 0x0D 0x0A → 0D0A
 SAVE: Save the transaction verification data.
- LIVE DISPLAY SETTINGS
 DISPLAY LINE: Set the number of lines to display on the screen.
 CLEAR TIME: Set the time period to display text on the screen. Data will be deleted from the screen if no new data is entered after the set time. If it is set
as “0”, the datawill not be deleted (If there is Start Character and the character is input, current data will be deleted regardless of the Clear Time setting).
 POSITION: Designate the display position of transaction data.
 FONT COLOR: Select the font color which will be displayed on the screen. It will be displayed with the color that is shown on “SAMPLE TEXT”
 SHOW: Select to display transaction data in the live mode.
 SCROLL REVERSE: Select to change the direction of scrolling. If it is selected, you can scroll from the bottom to top, the latest data is displayed on the
top.
PLAYBACK DISPLAY SETTINGS (
)
Open setup screen for playback mode
 DISPLAY LINE: Set the number of lines to display on the screen.
 CLEAR TIME: Set the time period to display text on the screen. Data will be deleted from the screen if no new data
is entered after the set time. If it is set as “0”, the data will not be deleted (If there is Start Character and the
character is input, current data will be deleted regardless of the Clear Time setting).
 POSITION: Designate the display position of transaction data.
 FONT COLOR: Select the font color which will be displayed on the screen. It will be displayed with the color that is
shown on “SAMPLE TEXT”
 SHOW: Select to display transaction data in the playback mode.
 SCROLL REVERSE: Select to change the direction of scrolling. If it is selected, you can scroll from the bottom to top, the latest data is displayed on the
top.
PORT SETUP (
)
Open setup screen for communication port
 TYPE: Setup the type of communication port.
- SERIAL: It is for 1-to-1 connection between NVR and Transaction Verification device without Serial Mux.
- MUX: It is for 1-to-Nulti connection between NVR and Transaction Verification device
 BAUDRATE: Set BAUDRATE according to the Transaction Verification device.
 PARITY: Set PARITY according to the Transaction Verification device.
 DATA BIT: Set DATABIT according to the connected Transaction Verification device.
 STOP BIT: Set STOPBIT according to the connected Transaction Verification device.
 TCP/IP PORT: Set the TCP/IP Port number.
4.2.5. KEYBOARD
When an external keyboard is used, select the model and corresponding baud rate from the drop-down options. The baudrate must match the one set in the keyboard
itself. Make sure the Keyboard ID in the SYSTEM> INFORMATIO setup page matched the one set in the keyboard.