User Manual

User Manual | 44
4.2.4. TRANSACTION VERIFICATION SETTINGS
TRANSACTION VERIFICATION equipment can be connected to NVR through RS-232 port or LAN.
NO
Port Number of the Serial connection. For example: NO1 = COM1, NO4 = COM4.
CAM
Assign a camera to the Transaction Verification device.
TYPE
Connection type between NVR and Transaction Verification device.
PROTOCOL
Communication protocol between NVR and Transaction Verification device.
SAVE
Enable or disable the NVR to save the transaction data.
SHOW
Enable or disable the NVR to display the transaction data.
SETUP (
)
- TRANSACTION VERIFICATION SETTINGS
 NO: ID# of Transaction Verification device.
 CAMERA: Select the camera to assign to the Transaction Verification device.
 TYPE: Select COM (RS-232) or TCP/IP (LAN)
 DEVICE IP: Input the IP address of the Transaction Verification device when it is connected
through the network.
 PROTOCOL: Communication protocol between NVR and the Transaction Verification device.
1. TEXT-IN: Receive ASCII character.
2. SNVR-POS: Manufacturer’s own protocol.
 Contact your Transaction Verification dealer for information.
 START CHARACTER: Input the assigned character to start display and save. If there is no input, the system will display and save all data without
classification per transaction.


