User Manual

43 | VMAX IP Plus™ NVR
number using the button. Press [ADD] to save the new preset. (The system supports preset the number of preset from 1 to 255.)
 DEL: delete the preset currently selected.
 Move: Enter a present number and press [Move] to move the camera to the preset position of that number.
TOUR: Set the camera to move between preset positions in order. The camera will keep running the tour until it manually
is disabled.
AUTO-PAN: Set the camera to move 360 ° in one direction. The camera will keep running the auto-pan until it manually
is disabled.
GUARD-TOUR: Set the camera to move between selected presets in a set order and interval. The camera will keep
running the guard tour until it is manually disabled.
 Set: Set the Interval (Sec) and select the preset position. Add to Sequence by clicking button.
The preset will appear in the Sequence column indicating the preset number and the set interval time.
 Delete: To delete a preset position form the sequence, select the preset in the Sequence column and click button.
 MOVE: Start GUARDTOUR.
HOME: Set the camera to move to an original position memorized by the camera.
In case the PTZ is directly connected to the rear panel of NVR, AUX control button ( ) is shown. User can control additional settings such
as Power, Light, Wiper and Pump, etc.