User Manual

User Manual | 40
Note
To be able to setup these functions from the NVR, the settings must be integrated by OnVIF. If the camera is OnVIF but the settings were not
integrated via OnVIF, you will have to setup the camera's settings from the camera's menu.
TITLE
Designate a name for each channel. The name will appear both in the NVR and remote software.
COVERT
“Covert,” also called ‘hidden camera’, hides camera display and playback as if there were no camera recording. Covert settings apply to both Live and Playback
view in both the NVR and remote software.
PRIVACY MASK
Hide specific areas in the camera’s Field of View (FoV) in live and playback mode. Please check that your camera supports this feature.
1. Click [SET] to get into the setup mode.
2. Using the popup menu on the bottom right, select where to place the privacy mask, assign a color and index number to it. Click ‘Save’ to save the changes
and ‘Exit’ to return to the main setup page.
CAMERA ADJUST
Set the camera’s brightness, contrast, color etc.
1. Click [SET] in the ‘CMAERA ADJUST’ section to get into the setup screen.
