User Manual

User Manual | 36
4.1.2. USER
The ADMIN user (default password is no password) has full authority for system setting and can change the system password or add/delete users and assign
different permission level to them.
Note
Maximum number of users including administrator is 16.
User Management
Admin user can control authorization for each function. This authorization is applied when the user connects to the NVR from a remote software as well.
1. Add User
a. Click [ADD].
b. In the new setup window, set new user’s ID, description, and password.
c. Select which functions and menu options the user will have access to by checking
the box next to the corresponding functions.
d. In Live and Playback mode, only the selected channels are visible to the user.
e. To change the setting, select user and click [Edit].
2. Delete User
a. Select user in the list by highlighting their name and click [Delete].
3. Option
a. If Auto Logon “On Boot” is enabled, the NVR will not request ID and password after power
up.
b. If “Auto Logoff” is enabled, the NVR will log off the current user after the set time of inactivity.
Setting Authorized Level at the Remote Software (CMS)
Level of authority for the user is linked between the NVR and Remote Software. If a user has been restricted in the
NVR, those restrictions will also be applied when operating the Remote Software.


