User Manual

35 | VMAX IP Plus™ NVR
VIDEO SIGNAL
Check the right video signal (NTSC or PAL). This setting should match the [NTSC/PAL] Selection Switch located on the rear panel. Video images might heavily
shake and blink if NTSC/PAL is not properly set.
IP ADDRESS
Shows the NVR’s current IP Address. It can be set at ‘MENU>NETWORK>NETWORK’.
AUTO IP
Shows AUTO IP Address of the NVR.
MAC ADDRESS
Shows the unique identity number for the NVR.
SYSTEM MONITOR
Monitor the system performance and condition.
KEY PAD BEEP
User can turn on or off the beeping sound of key pad.