User Manual

33 | VMAX IP Plus™ NVR
There are three types of time sync mode.
 Server Mode: The operating NVR is set as a Time Sync Server, which can synchronize the time other NVR(s) connected over the same network.
 Client Mode: Input the IP address of a designated NVR or PC running Remote Software as a Time Sync Server in “SYNC SERVER”. The NVR’s time
clock will be synchronized with the server by interval time set in “TIME SYNC CYCLE”.
 NTP Mode: “pool.ntp.org” is the recommended NTP Server. To activate, set the TIME ZONE of your local area and then click [SYNC NOW].
For DST setting, please refer to “3.7 DST Time Setting.
LANGUAGE
Select the display language from the available options.
VERSION
View the NVR’s current firmware version and update to a newer version via DVD/CD/USB Memory Stick/FTP server.
Caution
Do not click CANCEL during firmware upgrade. It may cause serious damage to the system.
Settings may be changed to factory default. It is recommended to check the settings and operating condition of the NVR after firmware
upgrade.