User Manual
User Manual | 16
Check the box next to [CAMERA MULTI SELECT] to select multiple cameras from the search results. Selected cameras will be highlighted in green.
When [APPLY] button is clicked, cameras will be registered one by one starting from the top. Cameras that are already registered will be shown as
unselected.
Note
During the registration process of Camera Multi Select, if there is a camera which has a different IP range or requires ID & Password, the process is
paused and the NVR will request the required information.
3.2.2.5. MANUALLY ADD CAMERAS
If a user wants to connect to an IP camera in a different network, the cameras can be added manually using the [ADD CAMERAS MANUALLY] button.
Click [ADD CAMERAS MANUALLY] to open the camera property window.
Select channel number to register.
Select protocol (ONVIF, RTSP, FOCUS and VHT) of the camera. Registration is available with one of the following. – IP Address, RTSP URL or ONVIF
URL
Input necessary information with button and click [GET STREAM] button to get streams information.
Click [APPLY] button to register camera.