User Manual
User Manual | 14
3.2.2. Camera Connection through Network
The NVR supports three ways to search and register cameras to the NVR. The AUTO CONFIGURATION option allows the NVR to scan the network and automatically
register the first cameras it finds to the available channels.
The DRAG & DROP CONFIGURATION option scans the network for supported cameras, displaying the results in a table from which you can drag cameras to the
viewing channel to assign them to channels.
For advanced settings and manually adding cameras, select ADVANCE CONFIGURATION.
3.2.2.1. AUTO CONFIGURATION
Select a recording mode for the cameras. This recording option will be applied to all cameras registered to
the NVR.
Click [START]. The NVR will search all cameras under the same network (subnet) and register them in order,
automatically.
3.2.2.2. DRAG&DROP CONFIGURATION
Click [START] button to search camera. The NVR will search the network for cameras and display all results in the table on the right.
Select camera in the list and drag and drop it to the channel you want to assign to the camera. (While moving, the mouse pointer is changed to
.)
Click [APPLY] to save all changes.
1
5
2