User Manual

13 | VMAX IP Plus™ NVR
3. Operation
3.1 User Log-in
Input USER and PASSWORD after turning on the system. The factory default of USER and PASSWORD are “admin” and no password.
Note
1) LOGIN window will be permanently displayed until a user logs in with the right USER and password.
2) If NVR is set as AUTO LOGIN, login process is not necessary. See “4.1.2 User” for more information.
Note
The key in the virtual keyboard includes common words, such as Admin, root, http://, rtsp://, www., .com, .net, .org etc.
3.2 Camera Registration
The NVR can connect to any ONVIF® IP cameras over the network. If the cameras are connected to the PoE switch in the back of the NVR, the cameras will also
receive power and transmit data to and from the NVR.
3.2.1. PoE Camera Connection
PoE cameras are automatically connected when the camera is plugged to the PoE port. Channels assigned to cameras connected to the NVR’s PoE switch will
display the channel title in green.
Cameras connected to the NVR’s PoE switch must be set to ‘DHCP’ before connecting to the NVR.
For cameras that support ‘Auto IP’, the NVR will automatically control its IP settings.
Note
If PoE camera is connected to the PoE channel while another camera is being assigned to that channel, the previously assigned camera moves to
another channel and the PoE camera will be assigned to that channel.
Note
Zero-Configuration
It is the Link-Local IP address assignment method through Auto-IP and it is for assigning IP, automatically, when the DHCP is not
available or supported. The device that adopts this technology selects 169.254.xxx.xxx, in general, and assign the IP address after
checking the availability of the selected IP address