User Manual

User Manual | 12
Auto Configuration (1)
The NVR will scan the network for all supported cameras and automatically register them to the available channels. Select the recording mode to apply to all
registered cameras and press [START]. The NVR will search all cameras under the same network (Router) and register them in order, automatically.
In case where there are multiple NVRs on the network, it is recommended to use the Drag & Drop or advanced configuration options to avoid a camera being
connected to multiple NVRs.
Drag & Drop Configuration (2)
The Drag & Drop Configuration scans the network for supported cameras, displaying the results in a table from which you can drag cameras to the viewing channel
to assign them to channels.
 Click [START] button to search camera.
 Select a camera and while clicking on the camera, drag it to a channel to assign it.
 Click [APPLY] button to finish the process.
Advanced Configuration (3)
Search the network for cameras and manually configure and register them to the NVR.
2.6 Finish
When the Setup Wizard is completed, click “FINISH” to close the wizard and go to the live view screen.
1
2
3