User Manual

User Manual | 8
Playback
Switch to playback mode. See “3.7 Playback Recorded Image” for details.
Exit
Close playback mode and move to live mode.
Pin
When selected, the NVR’s menu bar will be displayed on the screen permanently, regardless of the mouse’s position.
2. Startup Wizard
When the NVR is launched for the first time, the STARTUP WIZARD will appear. This wizard helps you setup the NVR’s most basic settings for proper functioning.
You can access the Startup Wizard screen at any time by clicking the Startup Wizard [ ] button in setting “MENU>SYSTEM>SETTINGS” menu. (See
“4.1.5 SETTINGS”).
2.1 Language
Select the language according to the country or user’s preference.
If “DISPLAY ON SYSTEM STARTUP” is selected, Startup Wizard will pop up every time the system is started.
2.2 Date/Time
Select the NVR’s date and time format, select the Time Zone, enable or disable daylight savings and sync the NVR with an NTP server or manually enter the date
and time. You can also select to sync the NVR with an NTP server, which will automatically sync your NVR’s date and time settings.