User Manual

Page | 82
12.2 Live Setup
12.2.1 Live Display
- Auto Switching Time: is time until the next channel (only being connected) group
begins to be shown on Live Screen when on Live Display Toolbar is being pressed.
The number in a group is dependent on the pieces of Live Screen on a current Live
Display. For example, if the current multiple Live Screen mode is 8-split-mode, the
group must have 8 numbers of.
- PTZ controller transparency setting: Select one of 4 degrees – None, High,
Medium and Low – to choose PTZ Control transparency level.
- Enable full window when double clicked in live mode: Check it to make Live
Screen automatically fit into Live Display pane when you go to one Live Screen mode
by double-clicking.
- Reset live video position on disconnection: Check it to erase a Live Screen
position-info memorized in each channel if device is disconnected. In other words,
you need to rearrange Live Display the next time you reconnect.
- Show PTZ controller with advanced mode: Check it to display PTZ Control as
an advanced mode every time it pops up.
- Hide cameras not set to record: Check it to hide the channels –not being
recorded – on Server List.
- Docking Live Window: Once checked, newly added page would be displayed in
main page.
- Check waiting channel in Search : display ‘Waiting’ message when playback
image not be renewed because of events.