User Manual

Page | 81
To set up auto-logout for the specific function, please follow those steps below.
1. Enter the setup mode by going to Tools >> Settings.
2. Select General and click the Lock setting Configuration
button.
3. The Function Lock Setting window appears as shown
picture.
4. Select desired functions you want to protect.
5. Specify waiting time for no operation period
6. Click OK button.
12.1.4 Use Disconnect notice dialog
- Notify of a disconnection event. Check on ‘Use Disconnection Notice Dialog’ to be
automatically informed when any device is accidentally disconnected or failing to
establish a connection
- Dialog duration time: is the preferred time to keep the dialog-box opened. If you
set it at “0”, it will NOT be closed until you close clicking “x” or pressing the ESC on
the keyboard. (measured in min)
- Disconnect Alert Sound Setting: select a type of alarm sound between WAV file and
the beep. You can also listen to it by clicking the Test button.
12.1.5 E-Map Alarm Event
Pivot Pro is able to display location of devices such as cameras and sensors on map. This
will also notify the events associated with a device that have a loss of live video or
motion detected.
- Color drop-down-list: Choose a color to display a particular predefined event.
- Auto switching to map event: Popup the registered map when any event occurs.
- Map display Duration Time: Specify the duration (in seconds) of the map popup.
- Use Map Alarm Sound: Select a type of alarm sound between WAV file and the
beep. You may also listen to it by clicking on Test button.
- Show Linked object Label: display label of linked devices.
- Pop up live on DVR events: Display live when event triggered on DVR.
- Pop up camera on events: Check to pop up the associated live screen when the
emergency alarm occurs.
- Camera popup always on top: Check this option to make event camera popup
window be always on top.