User Manual

Page | 67
8. E-Map
Remotely manage your site where security devices are installed using a graphical map.
8.1. Using E-Map
1. Click ‘Map List’ on left side.
2. Right click and select add map and add new map.
3. Press find and select map file.
- New Map name: enter name to be displayed.
- URL: check this option when you use site linked map.
4. Press OK to save the new map. The new map will
appear on the map list on the left panel.
5. To view the map, right-click on the map name and
select ‘Open Map’. The map will be displayed in the
main display area.
6. You can locate Cameras, Sensors, Relays, DVRs, and
Dome Cameras on the map according to their physical
location. This feature allows you to monitor individual
cameras and devices spread across a location, make sure they are properly working,
and get instant notifications when a sensor or an alarm are triggered. You can also
connect an item in one map with a different map by selecting the - - icon.
7. To enable icon placement on the map, make sure to unlock the lock icon at the top
of the display area and select Map items that you will replace on map.
8. Right-click behind Map Item on Live Display Toolbar. Chose an icon from the list.
9. Drop the icon on the map. The mouse icon will turn into a drop icon as seen below.
Point the mouse to the corresponding point in the map where the device you
selected is physically installed. Click on that location to place the device icon.
10. Select Server, Camera, and Icon Size and enable/disable the Use Audio feature and
click OK button.