User Manual

Page | 57
6.2. Single Connect
1. Right-Click any node you’d like to access to
2. Click ‘Connect’.
3. The icon next to the selected device will change to
meaning the device is connected.
4. Click on the ‘+’ icon next to a DVR name to
expand the device's list and view all cameras connected to the DVR
6.3. Group Connect
You may also establish a connection with multiple devices in the same group or all ones in
Server List at the time. This function is active only on the device item - -, not on the
group item.
1. Right-Click item in the group you’d like to make a
connection with.
2. Select Group Connect to connect all devices in the group or
Group Disconnect to disconnect all devices in the group.
3. You can notice is changed into when Pivot Pro finish
establishing a connection.
4. After connecting to devices, you can expand/collapse each
camera and examine its state by clicking ‘+/-‘.
6.4. Assigning a channel into a live screen by Drag & Drop
Pivot Pro enables you monitor all channels in live video mode. you can also select only
specific cameras from each device and arrange them on the Live Display Panel anyway you
want.