User Manual

Page | 55
5. Adding, Updating, and Deleting Connections
There are multiple ways you can access the Pivot Pros’ Device management window:
1. Press the settings button located at the top left-hand corner of the screen.
2. Go do Menu > Settings
3. In the Device List Panel, right click anywhere on the empty space
and select ‘Add Device’.
5.1. To add a device:
1. Model Name: Select the server’s model from the drop down options.
2. Server Name: Input a text for Server Name. Server Name can be up to 40
characters.
3. IP/URL: Input a IP address or URL of a remote device.
4. PORT#: Input a Port Number being used on the device connection. Please consult
your DVR or IP camera's Network settings to locate this information.
5. User ID: Type User ID to access to a remote device. Please consult your DVR or IP
camera's Network settings to locate this information.
6. Password: Type Password to access to a remote device. Please consult your DVR or
IP camera's Network settings to locate this information.
7. Group: Input a text to create a new Group or join an existing Group. The default
Group is a DVR Group.
8. ADD: Click Add to add new connection into Connection List. ( To add more nodes, go
back to number ① and follow the procedure from number ① to ⑧ again.)