User Manual

Page | 39
In Notification, each camera with video loss can be
synchronized with single and multiple callback or
emailing sites. Press to enter callback or email
address to be sent when video loss is detected.
PTZ can be set to move to a preset position when Video
Loss is detected. If Video Loss occurs, PTZ moves to the
position set in the preset.
2-6-4. MENU > EVENT > Text-In
The system allows Text In from POS/ATM machines.
Note : For use of POS/ATM, the system must support generic ASCII code.
To setup POS connection, make sure the POS device is properly connected to the DVR using the
RS-232 port. Consult the POS’s manual for more information.
To enable POS connection, check the box next to the corresponding protocol used. Go to Setup
for more configuration information.
Text-In Model: Select Text-In model from the list of supported devices.
Transaction Begin: Enter a word which the transaction info to be displayed on screen as a
start.
Any Character: Check Any Character to start display a text with any character as a start.
Transaction End: Enter the word that should be associated with the last line where the
transaction info to be displayed on screen.
Ignore String: Enter a word to ignore strings of text that include the selected word.
Line Delimiter: Enter a symbol or a word to distinguish the end of lines.
Case Sensitive: Select Case Sensitive option to distinguish a word with case sensitivity.