User Manual

Page | 35
2-5-3. MENU > NETWORK > Notification
Callback notifies multi remote clients when the DVR
detects events. Enter an IP address of the client sites to
receive event notifications from the DVR. Press to
open the virtual keyboard.
Callback Interval: Select Callback Interval to set the
time interval between consequential events being sent to
the remote site.
In Email, Events can be notified to personal email addresses as text message.
E-Mail Interval: Select the time interval between consequential events being sent to a remote
email.
Recipient: Enter the email address of a recipient. Up to 5 recipients can be entered.
Note : Any events that occur between the pre-set interval times will not be sent to remote site.
e.g. If the interval is set as 30 seconds, only events that occur 30 seconds after the first event
will be sent to remote site.
SMTP Server: Enter the SMTP server information. SMTP server information can be obtained
from your system administrator.
Sender: Enter the address/name of the sender account the email is being sent from.
2-5-4. MENU > NETWORK > Transmission
In Transmission, video streaming can be controlled
separately from the recording settings. Adjust resolution and
FPS for video streaming from the DVR to a remote client or
web viewer. You can also control the amount of bandwidth
used by the DVR.
2-6. EVENT
In Event menu, user can set event related actions. Events
are about Sensor, Motion, Video Loss, Text-In, System.