User Manual

Page | 33
2-5. NETWORK
In Network menu, Network configuration options for network Address, DDNS, Remote
Notification and Transmission can be set up.
2-5-1. MENU > NETWORK > Address
In Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be
set for network connections.
Type: Select type of network configuration from: Static IP, DHCP and ADSL(with PPPoE).
Select DHCP if your network supports DHCP and you would like the DVR to assign itself an IP
Address automatically based on the network settings.
Select Static if your network does not support DHCP, and you would like to access your DVR
remotely over the internet. In this case, manually enter all the information below. Please contact
your network administrator for more information on your network requirements.
IP Address: Enter IP address using the button.
Subnet Mask: Enter Subnet Mask using the button.
Gateway: Enter Gateway using the button.
DNS: Enter the IP address of a DNS server. If you set a DNS Server, domain name of the DVRNS
server instead of an IP address can be used during the DVRNS Server setup.
DNS sever address automatically: Select this to get the DNS Server Address automatically
when. This option is recommended when using DHCP or PPPoE.
Note : ID and Password are required in ADSL (with PPPoE) type.
In Port, Select the appropriate port number for external access to the system. The port list
shows necessary ports to be opened for each operation.
Network Port: Set port for DVR Remote Client. Default is: 10101.
Web Port: Set port for Web Remote Client. Default is: 80.
Note : Default TCP port is 10101 but it can be set from 1500 to 32000 if it is necessary.