User Manual

Page | 28
2-3. DISPLAY
Set display configuration options and composite outputs from this menu.
2-3-1. MENU > DISPLAY > Display
Language: Select the system’s language. Press to
select one of the available language options.
Hide Status Bar: Select On/Off and time to hide Status
Bar when system is not in use.
Vertical OSD Margin: Set vertical OSD margin on
screen.
Horizontal OSD Margin: Set Horizontal OSD margin on
screen.
Sequence interval: Set switching time between
camera displays in sequence mode.
Event popup: Popup a camera’s image in full screen
when an event occurs.
Resolution: Set resolution of HDMI and VGA output.
PIP: ‘Picture In picture’. Select size and position of sub
channel in comparison to the large image display.