User Manual

Page | 21
2. DVR Configuration
2-1. SYSTEM
In SYSTEM menu, you can access and setup the system’s general Information, Date &Time,
Users, Quick Setup, and System Log.
2-1-1. MENU > SYSTEM > Information
In the Information screen, the DVR’s Name, MAC Address, Version, Upgrade, Remote Controller
ID, and Configuration options can be selected.
DVR Name
To change the DVR’s name, press the button. Use virtual keyboard to enter DVR name.
Firmware Upgrade
To upgrade system, place the upgrade files on a USB Flash Memory and connect it to the DVR.
Once device is recognized, press the upgrade button to execute system upgrade.
Upgrade will take approximately 5 minutes. DVR will reboot automatically when the upgrade is
completed.
Note : DO NOT remove the USB Memory or turn off the system during the upgrade. Removing
USB Memory or turning off the system during the upgrade may cause system malfunction.
Remote Control ID
Enter the Remote Control’s ID to control multiple DVRs individually. If Remote Control ID remains
as 0, no need to select Remote ID when using remote controller.