User Manual

Page | 13
Audio output uses line output level. Connect speaker with built in power amplifier or power
amplifier passed one.
HDMI, VGA Output
Connect HDMI or VGA monitor. The VMAXHD Flex provides the
same image output on HDMI and VGA monitor. Available output
resolutions are 1920 x 1080, 1280 x 1024, 1280 x 720, and 1024
x 768. Factory default is 1280 x 720. To change output, follow one
of the following options:
1. Press and hold ‘Zoom’ button for 3 seconds on the remote controller. This changes resolutions
in the following order 1920 x 1080, 1280 x 1024, 1280 x 720, and 1024 x 768.
2. Select display resolution on quick setup menu.
3. Select display resolution on setup menu.
HDMI port provides 32 kHz sampling frequency audio output.
RS485/Alarm/Sensor
This RS485 connector can be used to control PTZ cameras or for a
joystick controller.
4 alarm output ports are available for controlling external alarms such
as sirens or lights. Alarm output connector supports TTL output signal.
4 sensor inputs are available for connecting external devices. You can use sensors as notifications
for events on the DVR. The emergency sensor is designed for Emergency recording only. This
follows Emergency recording configuration once it is triggered.
RS-232C connector is provided to connect an ATM/ POS machine with Text-In feature.
To make connection on terminal block, press and hold the button and insert the wire in the hole
below button.
Etc.
<2CH> <4CH>
• Network: Connect a LAN cable to the DVR’s RJ-45 port for remote monitoring via network,