User Manual

Page | 123
Select a site you want to connect to. Select Edit to modify a remote site’s information. Press the
button to add a new remote site, or delete the site by using the button.
Name: Enter the remote site’s name.
Address: Enter the remote site’s IP address.
Port: Enter remote site’s port information. Default port: 10101.
User / Password: Enter User and Password to log in. User has to be set with authority of
Network.
After the editing is done, click ‘Done’ button.
B. PTZ Mode
To enable remote PTZ control mode, right-click on the screen and select Remote PTZ from the
pop-up menu.