User Manual

Page | 103
1. How to use Digital Signage Maker
a. Select Source Video File
Files with extensions such as JPG, BMP, and JPEG
are not supported.
Please refer to above list for right file formats.
b. Select Output Device
Existing Logical drive or Removable device is
displayed as Drive Name.
DeviceName\advertise is the default file folder
name that MUST be changed or renamed.
If the \advertise folder is already created, the new
file will overwrite the existing one.
c. Enter Output File Name
Enter file name. The file name is automatically
created with numbers in order as follow:
E.g. filename_000001.jpg, filename_000002.jpg…
d. Select Video Type
The file can be saved as NTSC (704 x 480) or PAL (704 x 574) according to Video Type without
affecting display resolution.
e. Click Start Button
Click the start button. Play time and End time of Video File are shown under the progress bar.
The Video conversion process will be displayed in the window.
f. Import Digital Signage File into DVR
Create a folder by name of ‘advertise’ and same the files in that folder in USB flash memory.
Files must be saved in the folder and the folder name should be ‘advertise’. DVR will not
recognize any other folder names.
Once it is done, connect USB flash memory to DVR and follow Digital Signage instructions
(Import) to use Digital Signage features.
(Refer to Chapter 3. 2-3-4. Digital Signage for the detail)