User Manual

77 | VMAX960H CORE™ Digital Video Recorder
6.6 Pivot Setup
The CMS Setup includes software setup options such as site registration, network and user setup, display, event, and misc.
setup.
6.6.1 Registration
Add, Modify, Import, Export or Remove sites from your sites list.
To add a site:
1. Press the ‘Add’ button.
2. Enter the site’s name
3. Enter the site’s IP address and corresponding port
information.
4. Use the ‘Search’ button to find all supported devices on
the same network. When the search is completed, select
the camera you wish to add and press OK.
5. Enter the site’s username and password
6. Select the site’s model from the drop-down list.
7. Enter the number of channels supported by the site. For
example, for a 16 channel DVR, enter 1-16.
8. If necessary, adjust the default aspect ratio for the site.
9. Press ‘OK’ to save or ‘Cancel’ to exit.
To modify a site:
1. Check the box next to the site from the sites list.
2. Press the ‘Edit’ button.
3. Modify any necessary information in the registration page.
4. Press ‘OK’ to save or ‘Cancel’ to exit.
To delete a site:
1. Check the box next to the site from the sites list.
2. Press ‘Remove’. The site will be removed from the list.
There are no warning messages. Once the remove button
is pressed, a site will be removed from your sites list permanently.
Click Export to save the current site list and as a file. Click Import to import the file to the site list.
6.6.2 Adding IP Cameras
The Pivot V5.5 and up supports live video from OnVIF compatible IP Cameras. To add IP cameras:
1. Press the ‘Add’ button.
2. Select ‘ONVIF Device’ from the Model drop-down menu.
3. Enter the camera’s information. See 6.6.1 Registration for more information.