User Manual

User’s Manual | 70
6.4.14 Quick Site Access Menu
Right clicking on a site in the site list panel will bring up a quick access menu.
From this menu, you can:
 Add a new site to your list.
 Edit currently selected site.
 Open site in the display area in live mode.
 Open site in the display area in search mode.
 Disconnect all channels from the selected DVR currently in the viewing area.
 Disconnect all sites from the sites list.
 Remotely reboot the DVR.
 Open Event Search for the selected DVR.
 Remotely backup data from the selected DVR (on supported models).
 Remotely perform firmware upgrade for the selected DVR.
 Access the site’s Remote Setup. This will open the DVR’s web client for remote
configuration.
 View Pivot’s software version.
6.4.15 Quick Camera Access Menu
Right clicking on a channel in the display will bring up a quick access menu.
From this menu, you can:
 Transition between live and search viewing models.
 Disconnect a selected camera, all cameras from a selected device, or all
channels in the display area.
 Select viewing speed from the camera (set to Low Speed by default).
 Export a JPEG image, short clip, or print the selected channel.
 Change the display area’s view from 1, 4, 9 or 16 channel-viewing modes.
 Adjust aspect ratio. Select from 1:1, 4:3, or 16:9. The aspect ratio change will
apply to all channels in the display area.
 DE Interlace - improve image quality for all Analog cameras.
 Access the site’s Remote Setup. This will open the DVR’s web client for remote
configuration.
 View Pivot’s software version.