User Manual
Table Of Contents
- 1 Getting Started
- 1.1 Checking Supplied Items
- 1.2 Connecting Peripheral Device
- 1.3 System Startup and Shutdown
- 2 Explanation for Each Function
- 2.1 Front Panel
- 2.2 Rear Panel
- 2.3 IR Remote Controller
- 3 Operation
- 3.1 User Log-in
- 3.2 Quick Startup Wizard
- 3.3 Live Display Mode
- 3.4 PTZ Operation
- 3.5 Call Monitor Operation
- 3.6 Playback of Recorded Video
- 3.7 Quick Backup during Playback
- 3.8 Search Recording Image
- 3.9 DST Setting
- 3.10 Screen Saver
- 4 Setting
- 4.1 System
- 4.2 Device
- 4.3 Record
- 4.4 Network
- 4.5 Backup
- 4.6 Quick Setup
- 5 Web Client
- 5.1 Web Login
- 5.2 Web monitoring
- 5.3 Web Playback
- 5.4 Web Configuration
- 6 Pivot™ User Guide
- 6.1 PC Requirements
- 6.2 Software Installation
- 6.3 Software removal
- 6.4 Basic Operations
- 6.5 Pivot Functions
- 6.6 Pivot Setup
- 7 MAC ACS User Guide
- 7.1 System Requirement
- 7.2 Install
- 7.3 Basic Operation
- 8 Mobile Phone Software User Guide
- 8.1 iPhone application software
- 8.2 Android application software
- 9 Appendix : Network Setup for External Usage
- 10 Appendix : Specification
57 | VMAX960H CORE™ Digital Video Recorder
5.4 Web Configuration
The DVR can be remotely configured using the web client. This option is available only when connecting to the DVR remotely
using the ‘admin’ user.
To enter the DVR’s remote setup, press the ‘Remote Setup’ button on the top right side of the screen. The menu options will
be identical to those available on the DVR itself. See 4. Settings for more information
Main Classification
Sub Classification
SYSTEM
SYSTEM INFO
USER
HDD
DEFAULT
DEVICE
CAMERA
AUDIO
SENSOR
MOTION ALARM
EXTRA ALARM
RECORD
RECORD SETUP
PANIC RECORD
SCHEDULE
NETWORK
NETWORK
DDNS
NOTIFICATION
HEALTH CHECK
QUICK SETUP
QUICK SETUP
N
OTE
<System Reboot> enables user to reboot the system without any changes to the setup.
When the network is disconnected due to abnormal operation of the system, user can use this function
and try to reconnect. However, the IP number assigned to the system may be changed due to the DHCP
mode.