User Manual
Table Of Contents
- 1 Getting Started
- 1.1 Checking Supplied Items
- 1.2 Connecting Peripheral Device
- 1.3 System Startup and Shutdown
- 2 Explanation for Each Function
- 2.1 Front Panel
- 2.2 Rear Panel
- 2.3 IR Remote Controller
- 3 Operation
- 3.1 User Log-in
- 3.2 Quick Startup Wizard
- 3.3 Live Display Mode
- 3.4 PTZ Operation
- 3.5 Call Monitor Operation
- 3.6 Playback of Recorded Video
- 3.7 Quick Backup during Playback
- 3.8 Search Recording Image
- 3.9 DST Setting
- 3.10 Screen Saver
- 4 Setting
- 4.1 System
- 4.2 Device
- 4.3 Record
- 4.4 Network
- 4.5 Backup
- 4.6 Quick Setup
- 5 Web Client
- 5.1 Web Login
- 5.2 Web monitoring
- 5.3 Web Playback
- 5.4 Web Configuration
- 6 Pivot™ User Guide
- 6.1 PC Requirements
- 6.2 Software Installation
- 6.3 Software removal
- 6.4 Basic Operations
- 6.5 Pivot Functions
- 6.6 Pivot Setup
- 7 MAC ACS User Guide
- 7.1 System Requirement
- 7.2 Install
- 7.3 Basic Operation
- 8 Mobile Phone Software User Guide
- 8.1 iPhone application software
- 8.2 Android application software
- 9 Appendix : Network Setup for External Usage
- 10 Appendix : Specification
55 | VMAX960H CORE™ Digital Video Recorder
5.2.1 Web Client Operation
Monitor live video in 1, 4, 9 or 16 screen modes (depending on how many channels the DVR has). To view a camera single
channel mode, double-click on the screen. You can also change to a single channel-viewing mode by clicking the mode icon
located at the bottom of the screen.
You can return to multi-channel viewing mode by double-clicking anywhere on the screen
NOTE
The image resolution in “Live monitoring” can be adjusted from the DVR’s ‘Live Stream’ sub-menu under
the Quick Setup Menu. See 4.6 Quick Setup for more information.
N
OTE
If live image does not show properly due to network capabilities or low bandwidth, it is recommended to
close the web page and re-open.