User Manual

49 | VMAX960H CORE™ Digital Video Recorder
4.4.1 Health Check
The VMAX960H CORE offers a true DVR health monitoring, with pop-up messages and e-mail notification on video loss,
recording failure, and storage failure.
To setup:
1. Check the box next to "Enable Health Check"
2. Check the box next to the conditions you would like to be notified on.
3. Set the occurrence intervals.(For Example: when video loss occurs more than1 time a minute)
4. Select whether to receive a popup message when conditions are met.
5. Go to Network Notifications.
6. Under e-mail notifications, make sure the Health Check option is enabled.
When any condition occurs beyond the set intervals, the system will display a popup alert and send an e-mail notification.
N
OTE The system will not send alarm messages or email notification upon motion alarm or sensor unless the
recording schedule is set to record according to that event.
For example, if user sets “Continuous” only for “Schedule Setup” of the “RECORD” menu and marks the
“All” checkbox in “REMOTE NOTIFY”, then the system will not send alarm messages. In this case, user
has to set “C + M”, “MOTION”, “SENSOR” or “C+ S” for REMOTE NOTIFY or E-Mail NOTIFY to function
properly.