User Manual

User’s Manual | 48
4.4.4 Notification
On this setup menu, you can setup the DVR to send event notifications to a remote software or an e-mail address.
 Notifications Setup- the DVR’s outbound notifications messenger needs to be setup in order to send notifications.
1. DVR Name- This is the name that will appear in the notification’s sender information. Make sure it is associated
with the DVR for easy identification.
2. SMTP Server- Enter the server information associated with the sender’s email account.
3. Port- Enter notifications port info. Consult your network administrator for more information
4. Username and password- These are the username and password for the sender’s e-mail information.
5. From- This is the identification for the e-mail sent from the DVR. This should be the sending e-mail account.
6. Interval- setup an interval between every notification sent from the DVR. The DVR will then send one notification,
and wait the set interval time before sending another notification, even if the same event is occurring during that
time.
7. User SSL- Check this option to use a Secure Socket Layer (encrypted) option.
8. JPEG Image- Check the box to include a JPEG image of the event with the notification
 Remote Notify- The system can send event notification to an Advanced Client Software over the network.
1. To enable, check the box next to ‘Remote Notify’.
2. Press the ‘Add’ button to add a notification rule.
3. Enter the IP Address of the PC running the receiving client software and the port information. Additional setup in
the router may be needed so it is recommended to consult your network administrator.
4. Chose the alarm types that will trigger a notification. Select the options by checking the box next to each event
type.
 Text/ E-mail Notify- The system can send event notification to an E-mail address.
1. To enable, check the box next to ‘Text/ E-mail Notify’
2. Press the ‘Add’ button to add a notification rule.
3. Enter the receiving E-mail Address or phone number.
4. Chose the alarm types that will trigger a notification. Select the options by checking the box next to each event
type.
5. Select what event information to include in the notification.
6. For text messages, select the length of the message.